Varnish Ink Volume Abnormalities - Solutions
Aug 29, 2025| Varnish Ink Volume Abnormalities (Too Much or Too Little) in Vision UV Printers - Solutions
Meta Description: Troubleshoot abnormal varnish ink volume (too much or too little) in your Vision Positioning UV Printer. Our guide covers causes & fixes for pressure, clogs, air bubbles, and more.
(H1) Varnish Ink Volume Abnormalities (Too Much or Too Little): Causes and Solutions
(Intro Paragraph)
Maintaining consistent varnish ink volume is crucial for achieving high-quality, reliable results with your vision positioning UV printer. Abnormalities – whether too much or too little ink – can lead to print defects, head damage, and production downtime. This guide outlines common causes for varnish ink volume issues and provides practical solutions to resolve them efficiently.
(H2) Common Causes and Solutions for Varnish Ink Volume Issues
(Table Format for SEO/Snippets)
| Possible Cause | Solution |
|---|---|
| No ink supply from the secondary varnish cartridge | First, check if the main ink tank has ink. Then, verify if the mainboard is sending the ink supply signal. Finally, check the pump supplying ink from the main tank for abnormalities. |
| Abnormal negative pressure during printing | Check the air and ink lines of the negative pressure system for damage or disconnection, which could cause pressure issues leading to overflow or no ink ejection. |
| Incorrect print height | Print height too high causes varnish misting, leading to insufficient ink on the substrate. Adjust the print height. |
| Incorrect negative pressure | Negative pressure too low causes ink overflow on the head surface. Negative pressure too high creates excessive suction, reducing ink drop volume. Adjust negative pressure to spec. |
| Clogged or damaged printhead nozzles | Print a test pattern to check for missing nozzles. If missing nozzles are evident, perform head cleaning cycles to address clogs. Physical damage may require professional service. |
| Air in the ink lines or printhead | For G5i and i3200: Prime the lines between the secondary cartridge and the printhead to purge air. For G6: Purge air from the opposite end of the printhead. |
| Secondary cartridge temperature | Temperature too low or too high can affect ink viscosity and flow. Ensure the environment and cartridge are within specified temperature ranges. |
| Insufficient varnish volume during printing | Software compensation: In the Hansen software ("Bian Rui Bian Da" settings), change Channel 1 to pure large dot mode at 100% concentration. |
| Faulty butterfly filter | Replace the butterfly filter. |
| Damaged varnish ink tube | Replace the damaged ink tube. |
| Faulty varnish ink pump | Replace the ink pump. |
| UV lamp not adjusted correctly | The main lamp is curing varnish prematurely, the small lamp is too close to the head drying the ink, or the UV lamp power is too high. Adjust lamp position and power settings. |
| Board card flashing red | Check if the board card has a red light indicator. A red light may indicate a fault preventing varnish ejection. Consult technical manual or support. |
| Float switch in secondary cartridge stuck or faulty | If the ink inlet tube is obstructing the float, replace the internal tube. If the float switch itself is faulty, replace it. |
| i3200 Ink damper leak | Replace the leaking ink damper. |
| i3200 Cap station not extracting ink | Check if the cap station seals properly with the printhead. Verify the pump is operating during cleaning and check for disconnections in the tube from the pump to the cap station. |
| Main ink tank alarm abnormality | Check the alarm board for a red light indicating low ink. Note: A faulty float switch may not trigger the alarm. Also, ensure the alarm board mute button is engaged correctly if the buzzer isn't sounding. |
(H2) Proactive Maintenance Tips to Prevent Varnish Issues
Implement a regular printhead cleaning and maintenance schedule.
Use recommended OEM varnish inks to ensure compatibility.
Regularly inspect ink lines, filters, and pumps for wear or damage.
Monitor and maintain stable environmental conditions (temperature, humidity).
Keep firmware and software updated to the latest versions.
Train operators on basic troubleshooting and daily checks.
(H2) Conclusion
Understanding and addressing the root causes of varnish ink volume abnormalities is key to maintaining the performance of your vision UV printer. By following this systematic troubleshooting guide, you can minimize downtime and ensure consistent print quality. For persistent complex issues, always consult your printer's full manual or contact our technical support team.

Video


